System description
The impact noise control floor system uses GenieMat FF03NP acoustic underlay to provide high acoustic efficiency. The test results of this system are based on a minimum structure consisting of GenieMat FF03NP layer laid below a 60mm floor screed and above a 150mm thick concrete slab. Any possibility of increasing the thickness of the acoustic underlay or increasing the mass or using a suspended ceiling will bring better sound insulation results.
System applicability:
- Hotels, schools, hospitals, offices.
- High-rise apartments, multi-storey villas and areas requiring impact sound insulation.
System components:
| Floor Topping | : | Vinyl |
| Self-Leveling Mortar | : | LATICRETE Level |
| Floor Support | : | Cement Sand Screed (60mm) |
| Acoustic Underlay | : | Pliteq GenieMat FF03NP (3mm) |
| Structure Substrate | : | Concrete Slab (140mm) |
| Suspended Ceiling | : | No |
| Acoustic Performance: | IIC55 | STC57 |
Note: Increase the thickness of the acoustic underlays; Increased floor mass; Install suspended ceiling brings higher noise control performance to the system.
SYSTEM DRAWing
Below is a drawing using GenieMat FF03NP acoustic underlay for impact noise insulation flooring systems.
INSTALLATION VIDEO
Click on the video below to learn about how to install GenieMat FFNP and GenieMat RST products for impact noise insulation floors.
CONTACT US
To get advice on the most suitable system for your project, please contact us for the best supports.
